Want to order by phone? Call

01 821 1211

Call in your order today on 01 821 1211..
Free Delivery on all Till Rolls across Ireland
Till Rolls, Price Guns, Labels, Catering Packaging, Retail Packaging, Cleaning Supplies, Retail Fixtures...

Taxi Receipt Rolls: Sizes and Printer Compatibility

Till rolls · Updated 20 July 2026 · 6 min read

A box of Shop4Rolls blue 80mm coloured thermal rolls, one example of a specialist till roll
Taxi rolls sit in the same specialist family as coloured thermal (shown), sized to the machine rather than the till.

Taxi receipt rolls are small thermal rolls for the meter and receipt printers fitted in cabs, most commonly 57mm wide. The usual sizes are 57 x 30mm and 57 x 40mm, with the diameter set by how much paper your printer holds. Match the width first, then pick a length that suits your shift.

What size are taxi receipt rolls?

Taxi receipt rolls are compact thermal rolls, most commonly 57mm wide, to suit the small printers built into cab meters. 57 x 30mm and 57 x 40mm are the usual choices. The first number is the paper width and it has to match your printer exactly. The second is the roll diameter, and it only has to fit the paper bay.

Rolls are named by two or three numbers. Width, then diameter, then sometimes the core. Width is the one that matters most. A 57mm printer takes 57mm paper and nothing else. Feed it something narrower and the print drifts off the page. Feed it something wider and the roll will not sit in the holder.

Diameter is more forgiving. A bigger roll holds more paper and lasts longer between changes, so long as the lid still shuts. If your meter printer is a slim unit, stick with 57 x 30mm. If there is room in the bay, 57 x 40mm gives you more receipts per roll.

SizeWidthRoll diameterBest for
57 x 30mm57mm30mmSlim meter printers and handheld card terminals with a small paper bay
57 x 40mm57mm40mmMeter printers with room for a deeper roll, fewer changes on a long shift

Are taxi rolls the same as card machine rolls?

In most cases yes. Both are 57mm thermal rolls, and a 57 x 40mm roll that feeds a card terminal will usually feed a taxi meter printer too. The paper is the same. Only the diameter changes, based on the size of the bay in each machine. Check the fit before you buy in bulk.

This is handy if you take card payments in the cab, because one roll size can cover both machines. Buy a box of 57 x 40mm, keep a few in the boot, and you are covered for the meter and the terminal. If your card terminal is a small contactless unit, it may want the 30mm roll instead. The sizes and terminal brands are set out in our card machine rolls guide.

How do I check what roll my meter printer takes?

Take the roll you use now and measure it. Stand it on end and measure across the paper for the width. Measure across the full circle of a fresh roll for the diameter. Round to the nearest common size. If the old box is still about, the size is printed on it, which is quicker still.

Three ways to get it right:

  • Read the box. The size is printed on every box of rolls. Two numbers like 57 x 40 tell you everything you need.
  • Measure a fresh roll. Width across the paper, diameter across the circle. A tape measure is fine, you are matching to the nearest common size, not to the millimetre.
  • Check the printer. The paper bay lid or the manual usually states the paper width the machine expects.

If you are still unsure, send us a photo of the old box or the machine and we will match it. There is more on measuring in the till roll sizes guide.

Are taxi receipt rolls thermal?

Yes. Taxi meter printers use thermal paper, so the receipt prints with heat instead of ink. There is no ribbon or cartridge to buy or fit. The roll is the only thing you replace, which is what you want in a cab where there is no room for spare parts.

You can tell thermal paper by scratching the shiny side with a coin. It leaves a faint grey mark. Plain paper leaves nothing. The full explanation of how the coating works is in thermal till rolls explained.

Order taxi receipt rolls by the box

57mm thermal rolls for cab meter and receipt printers, at trade prices with fast Irish delivery from our Cavan warehouse.

Shop taxi receipt rolls

How long does a taxi roll last on a shift?

It depends on how many fares ask for a receipt and how long each one prints. A 40mm roll holds noticeably more paper than a 30mm roll of the same width, so it goes further between changes. Airport and corporate work prints far more receipts than street pickups, so paper use varies by driver more than by hours worked.

The practical way to size it is to note how long one roll actually lasts you, then buy enough for a month of that. Drivers on account work often move up to the 40mm diameter purely to stop changing paper mid-shift, which is worth doing if the paper bay has the room.

Rolls take up almost no space, so a spare in the boot costs nothing and saves you sending a passenger away without a receipt. Keep it out of a hot window, since thermal paper darkens with heat, and buy by the box because the cost per roll drops.

What other specialist rolls do drivers and operators need?

Taxi rolls are one of a family of rolls made for a specific machine or rule rather than a general till. If you also run vans or coaches, digital tachograph rolls are a legal requirement in scope vehicles, covered in tachograph rolls explained. If you run a depot office, coloured thermal can be handy for telling job types apart, covered in coloured thermal rolls. The full set is in the parent guide, specialist till and receipt rolls.

Frequently asked questions

What size are taxi receipt rolls?

Taxi receipt rolls are small thermal rolls, most commonly 57mm wide, to suit the compact meter and receipt printers fitted in cabs. The exact diameter depends on the printer, but 57 x 30mm and 57 x 40mm are typical. Check your meter's printer, then match the width first and the length to how often you reprint.

Are taxi rolls the same as card machine rolls?

In most cases yes. Both are 57mm thermal rolls, so a 57 x 40mm roll that feeds a card terminal will usually feed a taxi meter printer as well. The paper is the same and only the diameter changes, based on the size of the paper bay in each machine. Check the fit before ordering in bulk.

Are taxi receipt rolls thermal paper?

Yes. Taxi meter printers use thermal paper, so the receipt prints with heat rather than ink. There is no ribbon or cartridge to fit, and the roll is the only consumable you replace. You can confirm a roll is thermal by scratching the shiny side with a coin, which leaves a faint grey mark.

How do I find out what roll my taxi meter takes?

Read the size printed on your current box of rolls, or measure a fresh roll yourself. Measure across the paper for the width and across the full circle for the diameter, then round to the nearest common size. The printer manual or the paper bay lid often states the width too.

How many taxi rolls should I keep in the cab?

Keep at least one spare roll in the cab and a box at the office or at home. Rolls tend to run out mid fare rather than between jobs. Buying by the box costs less per roll and means you can always give a passenger a receipt without cutting a shift short.

Does heat damage taxi receipt rolls?

It can. Thermal paper reacts to heat, so a roll left on a dashboard or in a hot boot in direct sunlight may darken before you use it. Store spare rolls flat, out of sunlight and away from heat sources. Kept that way, a roll stays clean and prints properly when you fit it.

Shane Kelly, retail supplies specialist at Shop4Rolls, Ireland's dedicated supplier of till rolls and receipt rolls. Shop4Rolls has supplied till rolls, card-machine rolls and printed packaging to Irish retailers for over 20 years.