57 x 40mm vs 57 x 30mm Credit Card Rolls: Which 57mm Thermal Rolls Do You Need?
57 x 40mm and 57 x 30mm rolls are both 57mm wide, so both suit a 57mm card terminal. The second number is the roll diameter. A 57 x 40mm roll is fatter, holds more paper and lasts longer between changes. A 57 x 30mm roll is smaller, for terminals with a tighter paper bay.
What do the numbers on a 57mm thermal roll mean?
The numbers on a card roll are width, diameter and core. Width is the paper width across the roll, 57mm on almost every card terminal. Diameter is how fat the finished roll is, 40mm or 30mm. Core is the hole in the middle, almost always 12.7mm on card rolls.
So a roll sold as 57 x 40 x 12.7mm is 57mm wide, 40mm across the outside, with a 12.7mm core. Only the middle number changes between the two sizes in this guide. Width and core stay the same.
That matters because width is the number your terminal cannot argue with. Feed a wider roll into a 57mm printer and it jams. Diameter is more forgiving, but only up to the point where the roll stops fitting in the paper bay. The card machine rolls guide covers the full 57mm family.
Which roll holds more paper, 57 x 40mm or 57 x 30mm?
57 x 40mm holds more paper. Paper is wound around the core, so a bigger diameter means more wraps and more metres on the roll. A 57 x 40mm roll runs noticeably longer than a 57 x 30mm roll of the same paper, which means fewer roll changes at the counter.
The gain is bigger than it looks. Going from 30mm to 40mm adds paper all the way round the roll, not just on one side. If your terminal takes 57 x 40mm and you have been buying 57 x 30mm out of habit, you are changing rolls more often than you need to.
Busy sites can go further again. Shop4Rolls also stocks longer 57 x 46mm and 57 x 50mm rolls for terminals with the space for them.
| Size (W × Dia × Core) | Paper on the roll | Best for |
|---|---|---|
| 57 x 30 x 12.7mm | Less | Small, mobile and contactless terminals |
| 57 x 40 x 12.7mm | More, the standard | Most countertop and handheld terminals |
| 57 x 50 x 12.7mm | Most | High-volume terminals, fewest changes |
Will a 57 x 40mm roll fit a machine that takes 57 x 30mm?
Often it will not. The width is fine, but a 40mm roll is fatter than a 30mm one, and a small terminal's paper bay is cut to the smaller size. If the roll sits proud, the printer flap will not click shut and the paper will not feed properly. Use the size the machine is designed for.
The reverse is safe. A 57 x 30mm roll drops into a terminal built for 57 x 40mm with room to spare. It will print fine, it will just run out sooner. That makes 57 x 30mm a useful stopgap if you are caught short, but a poor everyday choice for a machine that could take the bigger roll.
How do I decide between the two sizes?
Work out the biggest diameter your paper bay will close on, then buy that. Countertop and handheld terminals are usually built around 57 x 40mm. Small pocket-sized readers are usually built around 57 x 30mm. When both sizes physically fit, the larger one is the better buy because it lasts longer.
The quickest check with no paperwork is the old roll itself. Stand a fresh roll beside the empty core you took out and compare how fat it is. If your new roll is clearly bigger, it is the wrong one for that bay.
- Check the size printed on the old roll's box first, it is the fastest answer.
- Measure the roll across the outside with a ruler if there is no box.
- Close the empty flap on a fresh roll before you commit to a full box.
- When two sizes both fit, buy the bigger one for fewer changes.
Brand and model detail is a topic of its own, covered in what rolls does my card terminal take. If the roll is in and the receipt is still blank, see how to put a roll in a card machine.
Is one size better value than the other?
Judge value per receipt printed, not per roll. A 57 x 40mm roll costs more than a 57 x 30mm roll but holds more paper, so the cost of each receipt is usually lower. Buying by the box lowers it again. The best value is the biggest roll your terminal will actually take.
There is a labour saving too. Every roll change is a queue standing still while a member of staff opens the flap and reloads. Fewer changes on a busy till means less of that. Both sizes are thermal, so neither needs ink or a ribbon. If thermal paper is new to you, start with thermal till rolls explained.
Order 57mm card machine rolls by the box
57 x 30mm, 57 x 40mm and longer sizes in stock, thermal, trade prices and fast Irish delivery from our Cavan warehouse.
Frequently asked questions
What is the difference between 57 x 40mm and 57 x 30mm rolls?
Both rolls are 57mm wide, so both suit a 57mm card terminal. The second number is the roll diameter. A 57 x 40mm roll is fatter, holds more paper and lasts longer between changes. A 57 x 30mm roll is smaller and made for terminals with a tighter paper bay.
What does 57mm mean on a thermal roll?
57mm is the width of the paper across the roll. It is the number that has to match your card terminal, because a wider roll will not feed through a 57mm printer. The other numbers are the roll diameter and the core, which is almost always 12.7mm on card rolls.
Will a 57 x 40mm roll fit my card machine?
It fits if your terminal is built for that size, which most countertop and handheld terminals are. A 40mm roll is fatter than a 30mm one, so in a small terminal the printer flap may not close. Check the size on your last roll's box before ordering.
Can I use a 57 x 30mm roll instead of 57 x 40mm?
Yes. A smaller roll drops into a bigger paper bay with room to spare and prints normally. It just holds less paper, so you will change rolls more often. It works well as a stopgap, but the larger roll is the better everyday choice if your machine takes it.
Which 57mm roll lasts longer?
57 x 40mm lasts longer. Paper is wound around the core, so a larger diameter means more wraps and more paper on the roll. On a busy terminal that means fewer roll changes and less time with the queue held up while a member of staff reloads.
Are 57mm card rolls thermal?
Yes. Card machine rolls in both 57 x 40mm and 57 x 30mm are thermal, so the terminal prints with heat rather than ink. There is no ribbon, cartridge or toner to buy. The roll is the only thing you replace when the paper runs out.
