What Are PDQ Rolls? Chip-and-Pin Receipt Rolls Explained
PDQ rolls are the small thermal paper rolls that print receipts in a chip-and-pin card machine. PDQ is an old trade name for a card payment terminal, so the roll took the name too. They print with heat rather than ink, and almost all are 57mm wide, with 57 x 40mm the everyday size.
What does PDQ stand for?
PDQ stands for Process Data Quickly. It was a trade name for the card payment terminals that shops started using decades ago, and the name stuck to the machine and to the paper it prints on. When a supplier says PDQ rolls, they mean receipt rolls for a card machine, nothing more.
You will see the same roll sold under several names. PDQ rolls, card machine rolls, chip-and-pin rolls, credit card rolls and card terminal rolls all describe the same product. If a listing gives the size in millimetres and says thermal, you are looking at the right thing.
| Name you will see | What it actually means |
|---|---|
| PDQ roll | The trade name. From Process Data Quickly, an old term for the terminal itself. |
| Chip-and-pin roll | Named after how the customer pays, not after the paper. Same roll. |
| Card machine roll | The plain-English version, and the one most Irish buyers search for. |
| Credit card roll | How the roll is usually shelved and listed by suppliers. Same roll again. |
| Till roll | Not the same. A wider roll for the till itself, not for a payment terminal. |
The full background on sizes, terminals and loading is in the card machine rolls guide.
Are PDQ rolls thermal, and do they need ink?
PDQ rolls are thermal, so they need no ink at all. The terminal has a small heated print head that darkens a coating on the paper to form the receipt. There is no cartridge, ribbon or toner in a card machine. The roll is the only thing you ever replace.
That is why a card machine has so little to go wrong. Drop a fresh roll in, close the flap, and it prints. If a receipt comes out blank, the roll is almost always in upside down, because only the coated outer side of thermal paper takes the print. Turn the roll over and try again.
What size PDQ roll does my card machine take?
Nearly every card machine takes a 57mm-wide roll, so the only real question is the length. 57 x 40mm is the standard and fits most terminals. 57 x 30mm is shorter, for smaller and contactless machines. The three numbers on a roll are width, diameter and core.
The core on a card roll is almost always 12.7mm, so you rarely have to think about it. Width is the number that must be right. A roll that is too wide will not sit in the paper bay, and a roll that is too narrow will wander and misfeed.
Beyond the two everyday sizes, shorter rolls exist for compact mobile terminals and longer ones for busy machines that would otherwise need changing several times a day. Two ways to be sure before you order. Check the size printed on the box your last rolls came in, or take the old roll out and measure the width across the paper. If you want it by terminal brand, see what rolls does my card terminal take. For a closer look at the two common lengths, read 57 x 40mm vs 57 x 30mm credit card rolls.
Are PDQ rolls the same as till rolls?
PDQ rolls and till rolls are the same kind of thermal paper in a different size. A PDQ roll is narrow, 57mm, so it fits inside a card terminal. A till or receipt printer normally takes a wider 80mm roll. Swapping one for the other will jam or misfeed.
Most shops need both. The till prints the itemised receipt on 80mm paper, and the card machine prints the payment slip on 57mm paper. Keep the two boxes apart on the shelf, because a 57mm roll dropped into an 80mm printer will feed crooked and waste paper.
- PDQ roll: 57mm wide, thermal, fits card payment terminals.
- Till roll: usually 80mm wide, thermal, fits tills and receipt printers.
- Both: print with heat, so neither needs ink or a ribbon.
Why does a PDQ receipt fade, and does it matter?
A PDQ receipt fades because the print is a heat reaction in a coating, not ink soaked into the paper. That reaction slowly reverses. A card receipt kept cool and dark usually stays readable for one to three years, while heat, sunlight and a warm card wallet speed the fading up considerably.
For the customer copy that rarely matters, because the slip is only needed for a few days. For your merchant copy it can matter a lot, since that is the record you would reach for in a chargeback or an audit. If you need one long term, photograph or scan it rather than trusting the paper.
The same chemistry explains why unused rolls need care. A roll left on a sunny windowsill or beside a fryer greys off before it ever reaches the terminal. Keep spares somewhere cool, dry and dark, and loading them stays a quick job, see how to put a roll in a card machine.
Order PDQ rolls by the box
Every 57mm size in stock, thermal, at trade prices with fast Irish delivery from our Cavan warehouse.
Frequently asked questions
What are PDQ rolls?
PDQ rolls are the small thermal paper rolls that print receipts in a chip-and-pin card machine. PDQ is an old trade name for a card payment terminal, and the name carried over to the paper. They print with heat rather than ink, and almost all are 57mm wide.
What does PDQ stand for?
PDQ stands for Process Data Quickly. It was a trade name for the card payment terminals shops began using decades ago, and it stuck to both the machine and the receipt roll it uses. A supplier selling PDQ rolls simply means receipt rolls for a card machine.
Are PDQ rolls the same as credit card rolls?
Yes. PDQ rolls, card machine rolls, chip-and-pin rolls and credit card rolls are all names for the same product, a narrow thermal receipt roll for a card payment terminal. If the listing gives a millimetre size and says thermal, you are looking at the right roll.
What size are PDQ rolls?
Almost all PDQ rolls are 57mm wide, and only the length changes. 57 x 40mm is the standard size and fits most terminals, while 57 x 30mm is shorter and suits smaller or contactless machines. The core is nearly always 12.7mm, so width is the number to match.
Do PDQ rolls need ink or a ribbon?
No. PDQ rolls are thermal, so the terminal prints by heating a coating on the paper. There is no cartridge, ribbon or toner inside a card machine, and the roll is the only consumable. If a receipt prints blank, the roll is usually in upside down.
Can I use a till roll in a card machine?
No. A standard till roll is around 80mm wide and will not fit the 57mm paper bay of a card terminal. Both are thermal paper, but the widths are different, and forcing the wrong size in will jam the printer or feed the paper crooked.
