What Rolls Does My Card Terminal Take? Thermal Paper Rolls for Clover Mini, Ingenico, Verifone, SumUp and Dojo
Card terminals nearly all take a 57mm wide thermal roll, so the only real question is the length. Countertop and handheld machines from Ingenico, Verifone, Clover, Dojo and Worldpay take 57 x 40mm. Small mobile readers such as SumUp and Zettle take the shorter 57 x 30mm.
What size roll does my card terminal take?
Your card terminal almost certainly takes a 57mm wide thermal roll. The width is the same across brands, so what changes is the diameter, which is how much paper the roll holds. 57 x 40mm is the default for countertop and handheld machines. 57 x 30mm suits smaller readers with a shallow paper bay.
A card roll is described by three numbers: width, diameter and core. Width has to match or the paper jams. Diameter has to fit inside the paper bay so the flap still clicks shut. The core on a card roll is almost always 12.7mm, so you rarely need to think about it. There is more on the sizes in the card machine rolls guide.
Machine makers change model names often, so treat the table below as a starting point and check your own roll before you order a pallet of anything.
| Terminal | Usual roll | Notes |
|---|---|---|
| Ingenico Move, Desk, Lane | 57 x 40 x 12.7mm | The standard card roll |
| Verifone V200, V400 | 57 x 40 x 12.7mm | Countertop and portable both |
| Clover Flex, Clover Mini | 57 x 40 x 12.7mm | Drop-in top loader |
| Dojo | 57 x 40 x 12.7mm | Handheld card machine |
| Worldpay | 57 x 40 x 12.7mm | Most countertop models |
| Square Terminal | 57mm wide, check the diameter | All-in-one unit with a built-in printer |
| SumUp and Zettle printer units | 57 x 30 x 12.7mm | Shallow bay, shorter roll |
| Busy terminals of any brand | 57 x 46 or 57 x 50mm | Only if the bay is deep enough |
Which thermal paper rolls fit a Clover Mini or Clover Flex?
Clover Mini and Clover Flex both take a 57mm wide thermal roll, normally 57 x 40mm with a 12.7mm core. Both are top-loading, so you drop the roll straight into the bay with the paper feeding from underneath. A 57 x 30mm roll will also print, it just runs out sooner.
Clover machines print a fair amount per sale, especially in hospitality where the receipt carries the itemised order. That makes the longer 57 x 40mm roll the sensible default. If your Clover sits on a busy counter and staff are changing paper mid-service, check whether the bay closes on a 57 x 46mm roll before you switch, because an oversized roll stops the flap latching.
What rolls do Ingenico, Verifone and Dojo machines take?
Ingenico Move, Desk and Lane terminals, Verifone V200 and V400 units, and Dojo handhelds all take 57 x 40mm thermal rolls with a 12.7mm core. These are the workhorse card machines in Irish shops, pubs and takeaways, and the 57 x 40mm roll is what they are designed around.
Ingenico and Verifone have been making terminals for decades, so you may meet an older model in the field. The width stays 57mm on almost all of them. If an older unit has a tight bay, the 57 x 30mm roll is the safe fallback. Never force a roll in to make it fit. You will bend the flap and end up buying a new machine instead of a new roll.
- Ingenico Move, Desk and Lane ranges: 57 x 40mm.
- Verifone V200 and V400 ranges: 57 x 40mm.
- Dojo handheld and countertop: 57 x 40mm.
- Worldpay countertop and portable: 57 x 40mm.
What about SumUp, Zettle and Square readers?
Small mobile readers behave differently. SumUp and Zettle printer units have a shallow paper bay and take the shorter 57 x 30mm roll. The Square Terminal is a larger all-in-one unit with a built-in printer, so it takes a 57mm roll with more room for diameter. Card-only readers with no printer take no roll at all.
This is where most wrong orders happen. Someone buys a box of 57 x 40mm because it is the common size, then finds the flap on a small reader will not close. The paper is the right width, the roll is simply too fat. If your reader is pocket sized, start with 57 x 30mm. The full comparison is in 57 x 40mm vs 57 x 30mm credit card rolls.
Rolls for every card terminal, by the box
57 x 25, 30, 40, 46 and 50mm thermal card rolls in stock at trade prices, with fast delivery from our Cavan warehouse.
How do I check what roll my terminal takes?
Check the old roll first. The size is usually printed on the box it came in, and often on the roll wrapper. If you have neither, measure the roll with a ruler. Width across the roll, then the diameter of a full unused roll. Those two numbers are your size.
Three quick ways to get the answer without guessing:
- Read the box. The size is printed as width x diameter x core, for example 57 x 40 x 12.7mm.
- Measure the bay. Open the flap and measure how wide and how deep the paper well is. Your roll needs to sit inside it with the flap closing freely.
- Check the manual. The terminal manual or the payment provider's support page lists the paper size for that model.
If a receipt comes out blank after a change, the roll is in the wrong way round. Only the coated outer side of thermal paper takes the print, so flip it. Step by step in how to put a roll in a card machine.
Do delivery platform terminals take a different roll?
Usually yes, because they are not card terminals. The tablet supplied by Just Eat, Deliveroo or Uber Eats comes with a separate order printer, and that is an ordinary receipt printer rather than a payment terminal, so it normally takes a wider roll than the 57mm your card machine uses.
The practical upshot for a takeaway is that one box of card rolls will not keep the whole counter running. Work out the order printer's size separately from the card terminal's. That is covered in rolls for Just Eat, Deliveroo and Uber Eats terminals.
Get it wrong and you will know quickly. A roll that is too wide jams the print head. A roll that is too narrow drifts sideways and prints crooked or partial receipts. A roll with too big a diameter stops the flap closing, so nothing prints at all. Stick to the size your terminal was built for and buy it by the box. The cost per roll drops and you stop running out at the worst moment.
Frequently asked questions
What size thermal roll does a Clover Mini take?
A Clover Mini takes a 57mm wide thermal roll, normally 57 x 40mm with a 12.7mm core. It is a top loader, so the roll drops straight into the bay with the paper feeding from underneath. A 57 x 30mm roll will also print but runs out sooner.
What roll does an Ingenico card machine take?
Ingenico terminals including the Move, Desk and Lane ranges take 57 x 40mm thermal rolls with a 12.7mm core. The width is the same across almost all Ingenico models. If an older unit has a tight paper bay, the shorter 57 x 30mm roll is a safe fallback.
Do SumUp and Zettle readers take the same roll as a card machine?
They take the same 57mm width but a shorter roll. SumUp and Zettle printer units have a shallow paper bay and normally take 57 x 30mm. A 57 x 40mm roll is the right width but too fat, so the flap will not close properly.
What rolls does a Worldpay or Dojo terminal take?
Both take 57 x 40mm thermal rolls with a 12.7mm core, the standard card machine size. Countertop and handheld models use the same roll. If your terminal is very busy, check whether the bay closes on a longer 57 x 46mm or 57 x 50mm roll.
How do I find out what size roll my card terminal needs?
Check the box your last roll came in, since the size is printed as width by diameter by core. If you have no box, measure a full unused roll across its width and then its diameter. You can also check the terminal manual or your payment provider's support page.
What happens if I put the wrong size roll in a card machine?
Too wide and the paper jams the print head. Too narrow and it drifts sideways, printing crooked or partial receipts. Too big a diameter and the flap will not close, so nothing prints. Repeated jamming shortens the life of the terminal, so use the size it was designed for.
