Want to order by phone? Call

01 821 1211

Call in your order today on 01 821 1211..
Free Delivery on all Till Rolls across Ireland
Till Rolls, Price Guns, Labels, Catering Packaging, Retail Packaging, Cleaning Supplies, Retail Fixtures...

Bond Rolls vs Thermal Rolls: Which Does Your Printer Use?

Till rolls · Updated 20 July 2026 · 6 min read

A box of Shop4Rolls 80mm x 80mm thermal till rolls, the size most receipt printers take
Thermal rolls print with heat. Bond rolls are plain paper and need an ink ribbon. Match the type to your printer.

Bond rolls are plain, uncoated paper that needs an ink ribbon to print. Thermal rolls carry a heat-sensitive coating and print with heat alone, no ribbon needed. Modern tills and card machines take thermal. Older impact printers, like kitchen docket printers, take bond. Put the wrong one in and you get a blank receipt.

What is the difference between bond rolls and thermal rolls?

The difference is the paper itself. A thermal roll has a heat-sensitive coating on one side, so the printer's hot print head darkens the paper directly. A bond roll is plain, uncoated paper with no coating at all, so it needs an ink ribbon and a printer that strikes the paper to make a mark.

That one difference sets everything else. A thermal printer has no ink in it, only heat, so the roll is the only thing you ever buy. A bond printer needs two consumables, the roll and the ribbon, and the ribbon fades long before it runs out completely.

The wider background on how the coating works is in the till roll compatibility guide.

How do I tell if my roll is bond or thermal?

Drag a coin or a fingernail firmly across the paper. Thermal paper leaves a grey or black line where the friction heats the coating. Bond paper leaves nothing at all. Thermal also has one smooth glossy side and one matt side, while bond feels the same on both sides.

The test takes moments and settles it every time. Three more clues if you want a second opinion.

  • Look inside the printer. If you can see an ink cartridge or ribbon cassette, the machine takes bond. No ribbon means thermal.
  • Count the layers. Bond rolls are often 2-ply, a white top copy and a coloured copy underneath. Thermal rolls are always single ply.
  • Listen to it print. Impact printers rattle. Thermal printers are near silent.

Which printers take bond rolls?

Bond rolls go in impact printers, also called dot-matrix printers. The best known are kitchen docket printers such as the Epson TM-U220 and the Star SP700. Some older cash registers and weighing scales use bond too. If your printer needs a ribbon to print, it takes bond paper.

Bond also turns up outside the kitchen, which surprises people. Some weighing scales, older slip printers and validation printers for cheques and dockets all print by striking a ribbon, so they take plain paper too. If a machine has a cartridge in it, bond is what it wants, whatever the machine is for.

A box of Shop4Rolls 76mm x 70mm 2-ply kitchen printer rolls showing the white and yellow copy layers
76 x 70mm 2-ply bond rolls for impact kitchen printers. The top copy goes to the kitchen, the second stays at the pass.

The common bond size is 76mm wide. You will also see 1 ply bond rolls where you only need a single copy, and 2-ply or 3-ply where you need duplicates. More on choosing between them in kitchen printer rolls: impact vs thermal.

Which printers take thermal rolls?

Thermal rolls go in almost every modern receipt printer. That covers shop tills and receipt printers like the Epson TM-T and Star TSP ranges, all the main card terminals, and thermal docket printers. If the machine has no ribbon inside it, it is thermal.

Two sizes cover most thermal work. 80 x 80mm is the standard for tills and receipt printers. 57mm is the standard for card machines, usually 57 x 40mm. Brand-by-brand lists sit in till rolls for Epson TM printers.

Bond vs thermal at a glance

Bond (plain paper)Thermal
How it printsInk ribbon struck onto paperHeat from the print head
Needs a ribbonYesNo
Coin scratch testNo markGrey mark
Layers1, 2 or 3 plySingle ply only
Common width76mm80mm tills, 57mm card machines
Typical machinesImpact kitchen printers, older registersTills, card terminals, thermal docket printers
Print noiseLoudQuiet
Print holds up to heatYesCan darken near heat and steam

What happens if I use the wrong roll?

You get a blank receipt. A bond roll in a thermal printer prints nothing, because there is no coating for the heat to react with. A thermal roll in an impact printer prints faintly or not at all, and the ribbon can smear the coated surface. Neither combination damages the machine, but neither works.

If your printing has gone faint rather than blank on an impact printer, the roll is probably fine and the ribbon is worn. Ribbons are cheap and easy to forget until the docket fades. The Epson ERC-30, ERC-34 and ERC-38 family and the Star RC700 cover most machines. Which one fits which printer is set out in ink ribbons explained.

Order the right roll for your printer

Bond and thermal rolls in every common size, plus matching ink ribbons, at trade prices with fast Irish delivery from our Cavan warehouse.

Shop plain paper rolls

Which should I buy?

You do not really choose. Your printer chooses for you. Work out which type the machine takes, then pick the size and the ply. If you run both a thermal till at the counter and an impact printer in the kitchen, you need both types on the shelf, plus ribbons for the impact one.

Bring the old box with you when you reorder. The type, the width and the ply are all printed on it, which saves the guesswork. If the box is long gone, do the coin test and measure the paper width, then order to match from thermal till rolls or plain paper rolls.

Frequently asked questions

What is the difference between bond rolls and thermal rolls?

Bond rolls are plain, uncoated paper that needs an ink ribbon to print. Thermal rolls have a heat-sensitive coating and print with heat from the print head, so no ribbon is needed. Bond suits impact printers such as kitchen docket printers. Thermal suits modern tills and card machines.

How do I tell if a roll is bond or thermal?

Drag a coin or a fingernail firmly across the paper. Thermal paper leaves a grey or black line where the friction heats the coating. Bond paper leaves no mark at all. Thermal also has one glossy side and one matt side, while bond feels the same on both sides.

What are 1 ply bond rolls?

A 1 ply bond roll is a single layer of plain paper, so it prints one copy. A 2-ply roll has a second coloured layer underneath and prints a duplicate at the same time, which kitchens use so the pass keeps a copy. Both types need an ink ribbon in the printer.

Can I use a thermal roll in a bond printer?

No. An impact printer prints by striking a ribbon against the paper, and a thermal roll gives a faint mark or nothing at all. The ribbon can also smear across the coated surface. It will not damage the printer, but you will not get a usable receipt or docket.

What size are bond rolls?

The common bond size is 76mm wide, which suits impact kitchen printers such as the Epson TM-U220 and the Star SP700. Bond rolls come in 1 ply, 2-ply and 3-ply depending on how many copies you need. Check the width and the ply printed on your old box before reordering.

Do bond rolls need an ink ribbon?

Yes. Bond paper carries no coating, so the printer needs a ribbon to leave a mark. The common cartridges are the Epson ERC-30, ERC-34 and ERC-38 family and the Star RC700. Reorder ribbons alongside your bond rolls, because faded printing usually means the ribbon is worn, not the paper.

Shane Kelly, retail supplies specialist at Shop4Rolls, Ireland's dedicated supplier of till rolls and receipt rolls. Shop4Rolls has supplied till rolls, card-machine rolls and printed packaging to Irish retailers for over 20 years.