Want to order by phone? Call

01 821 1211

Call in your order today on 01 821 1211..
Free Delivery on all Till Rolls across Ireland
Till Rolls, Price Guns, Labels, Catering Packaging, Retail Packaging, Cleaning Supplies, Retail Fixtures...

Ink Ribbons Explained: Epson ERC-30, ERC-38 and Star Ribbons

Till rolls · Updated 20 July 2026 · 6 min read

A box of Shop4Rolls 76mm x 70mm 2-ply kitchen printer rolls showing the white and yellow copy layers
Impact printers take bond rolls like these 76 x 70mm 2-ply dockets, plus an ink ribbon to print them.

Ink ribbons are small cartridges of inked fabric that impact (dot-matrix) till and kitchen printers use to print. Pins inside the printer strike the ribbon against the paper to make each character. Epson impact printers usually take an ERC-30, ERC-34 or ERC-38 cartridge, and Star impact printers usually take an RC700.

What is an ink ribbon, and which printers need one?

An ink ribbon is a plastic cartridge holding a loop of inked fabric. It sits in front of the paper in an impact (dot-matrix) printer. Tiny pins in the print head strike the ribbon, and the impact presses ink onto the roll. Only impact printers need one. Thermal printers print with heat and use no ribbon at all.

This is the split that catches most people out when they reorder. Your shop till or card machine almost certainly prints with heat, so the roll is the only thing you buy. Your kitchen docket printer may well be an impact model, and that needs two things every time: a bond roll and a ribbon.

There is a quick test. Drag a fingernail or a coin firmly across the paper. A grey line means thermal, so no ribbon. Nothing at all means plain bond paper, so the printer uses a ribbon. The full comparison is in bond rolls vs thermal rolls.

Which ink ribbon does my printer take?

Match the ribbon to the printer model, not to the paper size. Epson impact printers take a cartridge from the ERC family, and the ERC-38 fits the widely used TM-U220. Star impact printers take an RC700. The model number is printed on the front or the underside of the printer, and often inside the paper bay.

Use this as a starting point, then confirm against your exact model before you order.

PrinterRibbonPaper it uses
Epson TM-U220 (kitchen / docket)ERC-3876 x 70mm bond, often 2-ply
Other Epson TM-U impact modelsERC family, confirm the code on the old cartridge76mm bond
Older Epson ECR tills and slip printersERC-30 or ERC-34Narrower bond, check the bay
Star SP700 (kitchen / docket)RC70076mm bond
Any thermal receipt printerNone80mm thermal

Not sure whether your printer is impact or thermal in the first place? Start with the till roll compatibility guide, then read kitchen printer rolls: impact vs thermal. If yours turns out to be an Epson, the model-by-model list is in till rolls for Epson TM printers.

What is the difference between ERC-30, ERC-34 and ERC-38?

The ERC-30, ERC-34 and ERC-38 are three cartridges in the same Epson family. They share the same basic shape and colour options, so suppliers usually list them together as one part. The differences come down to the amount of ribbon inside and the printers each one was made for, with the ERC-38 the most common today.

Because they look so alike, staff often order the wrong one from memory. Two habits stop that happening:

  • Keep the old cartridge until the new one arrives. The code is moulded or printed on it.
  • Write the printer model and ribbon code on a label inside the printer lid, so anyone can reorder.

If your supplier lists a ribbon as "ERC-30 / 34 / 38", that is the same cartridge sold against all three codes. It is a normal way to stock them, not a mistake.

Should you buy a black ribbon or a black and red one?

Ribbons come in plain black and in two-colour black and red. Black suits ordinary receipts and dockets. Black and red suits kitchens, because the printer can drop into red for allergy notes, order changes and special instructions. Pick whichever your staff already look for on the paper.

The red is not decoration in a busy kitchen. A line that prints red pulls the eye straight to it under pressure, which is why so many food businesses stay on two-colour ribbons and 2-ply rolls together. The top copy goes to the pass and the second stays with the chef.

One point worth knowing. A two-colour ribbon only prints red if the printer and your EPOS software are set to send it. If your dockets come out fully black on a red-capable ribbon, the setting is in your till software, not the cartridge.

Order ink ribbons with your rolls

Epson ERC and Star ribbons for impact till and kitchen printers, in black and black and red, at trade prices with fast Irish delivery from our Cavan warehouse.

Shop ink ribbons

How long does an ink ribbon last, and when should you change it?

A ribbon lasts far longer than a roll, so you will change many rolls before one cartridge. There is no warning light. You judge it by the print. When the text turns pale, patchy or grey instead of solid black, the ribbon is spent and the cartridge needs replacing.

How long that takes depends entirely on how much you print. A quiet cafe may run a ribbon for months. A busy kitchen printing every order all day gets through them far quicker. Watch the print rather than the calendar.

Signs it is time to change:

  • Faded or grey printing that is hard to read across the room.
  • Gaps or streaks along the line of text.
  • The red half of a two-colour ribbon fading before the black.
  • Smudging on the paper, which can mean the ribbon is worn or snagged.

Keep at least one spare on the shelf. A ribbon that dies mid service stops the kitchen seeing orders, and unlike a roll you cannot borrow one from the till next to it.

How do you change an ink ribbon?

Changing a ribbon is a quick job on most printers. Open the printer cover, lift the old cartridge out by its tab, drop the new one into the same slot until it clicks, take up any slack with the knob on the cartridge, then close the cover and print a test docket.

A few things that make it go smoothly:

  • Let the head cool if the printer has been running hard. The print head sits right beside the ribbon.
  • Turn the tension knob on the new cartridge before you close the lid. Slack ribbon is the usual cause of a jam right after a change.
  • Check the paper path. The ribbon must sit between the print head and the paper, not behind the roll.
  • Test print. Send one docket through before service starts, not during it.

If the print is still faint with a fresh ribbon, the print head may need a clean, or the paper may be the wrong type. A thermal roll loaded into an impact printer prints almost nothing no matter how new the ribbon is. Check the roll against the compatibility guide before you blame the cartridge.

Frequently asked questions

What is an ink ribbon used for?

An ink ribbon is a cartridge of inked fabric used by impact, or dot-matrix, till and kitchen printers. Pins in the print head strike the ribbon against the paper to form each character. Only impact printers need one. Thermal printers print using heat and need no ribbon, ink or toner.

Which ink ribbon does the Epson TM-U220 take?

The Epson TM-U220 kitchen printer takes an ERC-38 ribbon. It also needs bond paper rather than thermal, most commonly 76 x 70mm rolls and often 2-ply so the kitchen keeps a copy. Order the ribbon and the rolls together, because the printer will not print without both.

What is the difference between ERC-30, ERC-34 and ERC-38 ribbons?

They belong to the same Epson family and share the same basic cartridge shape, which is why suppliers often list them together as one part. The differences are the amount of ribbon inside and the printers each was made for. The ERC-38 is the most widely used of the three today.

Do thermal till rolls need an ink ribbon?

No. Thermal rolls carry a heat-sensitive coating, and the printer darkens it with a heated print head, so no ribbon, ink or toner is involved. Ribbons are only needed by impact printers, which use plain bond rolls. If you are unsure, scratch the paper with a coin. A grey mark means thermal.

How do I know when to replace an ink ribbon?

Judge it by the printing, as there is no warning light. When text turns pale, grey, streaky or patchy instead of solid black, the ribbon is worn out and should be replaced. On a two-colour ribbon the red often fades first. Keep a spare on the shelf so service is never held up.

What is the difference between a black and a black and red ribbon?

A black ribbon prints in one colour and suits ordinary receipts and dockets. A black and red ribbon lets the printer switch to red for allergy notes, order changes and special instructions, which is why kitchens favour it. Red printing only appears if your till software is set to send it.

Shane Kelly, retail supplies specialist at Shop4Rolls, Ireland's dedicated supplier of till rolls and receipt rolls. Shop4Rolls has supplied till rolls, card-machine rolls and printed packaging to Irish retailers for over 20 years.