Receipt Paper and Rolls for SumUp, Square and Toast Printers
SumUp, Square and Toast printers all use thermal rolls, in one of two widths. The small printer built into a card reader or handheld takes a 57mm roll, usually 57 x 40mm. A countertop or kitchen printer takes an 80mm roll, usually 80 x 80mm. Measure the paper width and you have your answer.
What receipt paper does a Toast printer use?
Toast printers use plain thermal receipt paper. The handheld reader prints on a 57mm roll. The countertop receipt printer and the kitchen docket printer print on an 80mm roll, most often 80 x 80mm on a 12.7mm core. Check the width of the paper in the bay and order the matching size.
Toast supplies the software and the hardware, but the paper is standard stock. There is no chip in the roll and no special coating you need to buy from one supplier. If the roll is the right width, the right diameter and thermal, it prints.
One thing worth knowing about kitchen dockets. Some sites run an impact docket printer in the kitchen instead of a thermal one, because heat and steam can fade a thermal docket. An impact printer needs bond paper and an ink ribbon, not thermal. That is covered in kitchen printer rolls: impact vs thermal.
What size roll does a Square Terminal take?
The Square Terminal takes a 57mm thermal roll. It is the same width used by nearly every card machine, so a standard 57 x 40mm credit card roll fits. Square's countertop printers and any kitchen printer wired into a Square setup take the larger 80mm thermal roll instead.
The second number in a roll size is the diameter, which sets how much paper is on the roll. A bigger diameter lasts longer between changes but has to physically fit the paper bay. If a roll will not close the lid, the diameter is too big, not the width. Smaller and contactless handsets often want 57 x 30mm for that reason.
What rolls does a SumUp printer take?
SumUp printers take 57mm thermal rolls. The Solo Printer dock and the older 3G handset both print at that width, and a 57 x 40mm roll is the usual choice. There is no ink, ribbon or cartridge involved, so the roll is the only consumable you ever reorder.
SumUp sells its own branded rolls, but you are not tied to them. Any 57mm thermal roll on a 12.7mm core does the same job. Buying by the box from a roll supplier is how most Irish shops and market traders keep the cost down.
57mm or 80mm: how do I tell which I need?
Look at the machine, not the brand. If the printer is built into a handheld card reader, it is 57mm. If it is a separate box sitting on the counter or in the kitchen, it is almost always 80mm. To be certain, lay the old roll flat and measure the paper across, or read the size printed on the last box.
- Built into the card reader. 57mm thermal, usually 57 x 40mm.
- Small or contactless handset. 57 x 30mm, a shorter roll for a shallow bay.
- Countertop receipt printer. 80 x 80mm thermal, the standard shop size.
- Kitchen docket printer. 80mm thermal, or 76mm bond plus a ribbon if it is an impact model.
| Device | Roll width | Typical size |
|---|---|---|
| SumUp Solo Printer / 3G | 57mm thermal | 57 x 40mm |
| Square Terminal | 57mm thermal | 57 x 40mm |
| Square countertop printer | 80mm thermal | 80 x 80mm |
| Toast handheld reader | 57mm thermal | 57 x 40mm |
| Toast countertop receipt printer | 80mm thermal | 80 x 80mm |
| Toast kitchen docket printer | 80mm thermal or 76mm bond | Depends on the model |
Treat the table as a starting point and confirm against your own unit, because these brands change hardware from time to time. The wider picture across every till and terminal brand is in the till roll compatibility guide.
Do I have to buy branded rolls from SumUp, Square or Toast?
No. None of these printers check what paper you feed them. They are ordinary thermal printers, so any thermal roll of the correct width, diameter and core prints exactly the same receipt. Buying generic rolls by the box from a roll supplier costs less and gives you more sizes to choose from.
The only real quality difference between rolls is the paper itself. Good thermal stock prints a clean, dark receipt and does not shed dust into the print head. Cheap stock fades faster and can leave a dusty residue that shortens the head's life. Ask for BPA-free rolls if your staff handle receipts all day.
If your printer refuses to print at all on a new roll, the paper is almost certainly in upside down, or the printer is an impact model that needs bond paper and a ribbon. See bond rolls vs thermal rolls.
Order the right rolls for your card reader
57mm credit card rolls and 80mm thermal till rolls in stock by the box, at trade prices, with fast Irish delivery from our Cavan warehouse.
What if I run a mix of machines?
Plenty of cafes and takeaways run a Toast or Square till at the counter, a handheld reader for table service and a docket printer in the kitchen. That means two or three roll sizes on the shelf at once. Keep them in separate labelled boxes so nobody grabs an 80mm roll for the handheld on a busy Friday.
If your setup also includes an Epson or Star printer, and many do, the roll for those is listed in till rolls for Epson TM printers. Shop the sizes on credit card rolls and thermal till rolls.
Frequently asked questions
What receipt paper does a Toast printer use?
Toast printers use standard thermal receipt paper. The handheld reader prints on a 57mm roll, usually 57 x 40mm. The countertop receipt printer and most kitchen docket printers print on an 80mm roll, usually 80 x 80mm on a 12.7mm core. Check the paper width in the bay before you reorder.
What size roll does a Square Terminal take?
The Square Terminal takes a 57mm thermal roll, the same width as almost every other card machine. A standard 57 x 40mm credit card roll fits. Smaller bays suit the shorter 57 x 30mm roll. Square countertop printers take the larger 80mm thermal roll instead.
What rolls does a SumUp printer take?
SumUp printers take 57mm thermal rolls. The Solo Printer dock and the 3G handset both print at that width, and 57 x 40mm is the usual choice. No ink, ribbon or cartridge is needed because thermal printers print with heat, so the roll is the only consumable.
Do I need branded rolls from SumUp, Square or Toast?
No. These are ordinary thermal printers and they do not check what paper you load. Any thermal roll of the correct width, diameter and core prints the same receipt. Generic rolls bought by the box from a roll supplier cost less and come in more sizes.
How do I tell if I need 57mm or 80mm rolls?
Look at the printer rather than the brand. A printer built into a handheld card reader takes 57mm. A separate printer on the counter or in the kitchen almost always takes 80mm. To be certain, measure the paper width on the old roll or read the size printed on the last box.
Are SumUp, Square and Toast rolls thermal or bond?
They are thermal. All three brands ship thermal printers, which print with heat and need no ink or ribbon. The one exception to watch for is an impact docket printer in a kitchen, which needs bond paper and an ink ribbon instead. Scratch the paper with a coin to check.
